To do this – Sony KP- 57WV600 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
Notes on Using This Connection
To Do This
...
Watch cable (unscrambled)
channels
Watch cable box (scrambled)
channels
Watch the VCR
Set up the TV remote control
to operate the cable box or
VCR
Activate the remote control to
operate the cable box or VCR
Control specific cable box and
VCR functions ivith the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This.
Press TV/VIDEO repeatedly to select the cable input (UHF/VHF in the
illustration).
Turn on the VCR and tune it to the channel the cable box is set to (usually
channel 3 or 4). Press TVA/IDEO repeatedly to select the VCR input (VIDEO 1
in the illustration). Use the cable box to change channels.
Press TV/VlDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 51-52.
For the cable box, press
SAT/CABLE FUNCTION.
For the VCR, open the outside
cover, as shown on page 50. Then set the A/V slide switch to the position
you programmed for the VCR.
See "Operating a Cable Box" on page 54 and "Operating a VCR" on page 53.
See the instructions for setting up Video Labels on pages 83-84.
29