Sony KP- 57WV600 - Manual (Page 92)

Remote Control
Problem
Remote control
does not operate
Cannot change channels
with the remote control
Possible Remedies
3
J
_l
Remote control
does not operate non-Sony
video equipment
The batteries could be weak. Replace the batteries.
Check the orientation of the batteries.
Press the TV FUNCTION button. You may have inadvertently pressed the
SAT/CABLE FUNCTION button, which changes the remote control to SAT or
CABLE mode.
Make sure the TV's power cord is connected securely to the wall outlet.
J Locate the TV at least 3-4 feet away from fluorescent lights.
_l If you are using the TV to change channels, first press the TV FUNCTION
button.
If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the charmel 3 or 4 setting. Use the
Channel Fix option to "fix" the channel based on the hookup you used (see
page 78).
□ If you are using another device to change channels, be sure to press the
FUNCTION button for that device. For example, if you are using your cable box
to change channels, be sure to press the SAT/CABLE FUNCTION button.
□ If you replaced the batteries to the remote recently, the code numbers for
the video equipment may need to be reset.
□ There may be more than one code for the equipment that you are
attempting to operate.
□ There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote. You may need to use the equipment's original
remote control.
Memory Stick
Problem
Image does not display
Blarrk square appears ^
instead of a thumbnail image
Cannot rotate image, no
thumbnail appears
Cannot hear audio while
using Memory Stick
Image file name does not
appear; instead, dashes (—)
appear
Possible Remedies
Q Make sure the image is supported by the TV (see pages 64-65).
□ Make sure the Memory Stick is inserted properly (see page 66 ).
J Memory Stick fimctions are not available while using Twin View, Freeze or
Favorite Channel functions.
3 This indicates that the image does not support a thumbnail view. Selecting
the icon, however, displays the full-size image on the screen. It could also
indicate that both the thumbnail and full-size images are corrupted or not
supported.
_i Be sure the LOCK switch on the Memory Stick is set to off.
□
If a blank square appears instead of the thumbnail image, this indicates
that the image does not support a thumbnail view and cannot be rotated.
_1 There is no audio available while using Memory Stick.
J Dashes appear instead of the file name if the image was recorded using
equipment that is not DCF-compliant. Dashes also appear if a DCF-
compliant file was renamed.
I
I
91