Sony KP- 57WV600 - Manual (Page 94)

Audio
Problem
Good picture, □
no sound □
Cannot gain enough volume J
when using a cable box
Sound seems weak or
J
insufficient
Cannot raise the volume on _(
external audio speakers
Possible Remedies
Press MUTING so that Muting disappears from the screen (see page 48).
Make sure the Speaker option is set to On in the Audio Menu (see page 75).
Increase the volume of the cable box using the cable box's remote control.
Then press TV FUNCTION and adjust the TV's volume.
The TV's audio might be set to Auto SAP or
Mono, when it might be better set
to Stereo. In the Audio Menu (see page 74), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 74). Or, to use the TV remote control, set the
Audio Out option to Variable.
To turn on the TV speakers, set the Speaker option to On (see page 74),
Channels
Problem
Cannot receive upper
channels (UHF) when
using an anterma
TV is fixed to one channel
Cannot receive any
channels when using
cable TV
Cannot receive or select
channels
Possible Remedies
□
□
Change the Cable option to Off (see page 78).
Use
Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV's memory (see page 78).
□ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV's memory (see page 78).
□ Check your Channel Fix settings (see page 78).
□ Use Àuto Program in the Channel Menu to add receivable channels that are
not presently in the TV's memory (see page 78).
□ Make sure the Cable option is set to On in the Channel Menu (see page 78).
□ Use Auto Program in the Channel Menu to add receivable TV channels that
are not presently in TV memory (see page 78).
I
I
93