To do this – Sony KP- 57WV600 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes on Using This Connection
To Do This...
Watch the satellite receiver
Watch the VCR
Set up the TV remote control
to operate the satellite
receiver or VCR
Activate the TV remote
control to operate the satellite
receiver or VCR
Control satellite receiver and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This...
Press TV/VIDEO repeatedly to select the VCR input {VIDEO 1 in the
illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Press TVA/IDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See "Programming the Remote Control" on pages 51-52.
For the satellite receiver, press
SAT/CABLE FUNCTION.
For the VCR, open the
outside cover, as shown on page 50. Then set the A/V slide switch to the
position you programmed for the VCR.
See "Operating a Satellite Receiver" on page 53 and "Operating a VCR" on
page 53.
See the instructions for setting up Video Labels on pages 83-84.
35