Dvd player with s video and audio connectors – Sony KP- 57WV600 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DVD Player with
S VIDEO and Audio
Connectors
To connect a DVD player with A/V connectors
1
Use an audio cable to connect the DVD player's audio output
jacks to the TV's audio input jacks.
2
Use an S VIDEO cable to connect the DVD player's S VIDEO jack
to the TV's S VIDEO jack.
Use this connection if your DVD player does not have component
video (Y, P
b
, P
r
) jacks.
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc
DVD player
^.^-■KT!Tir[]~[] .............. .......... . l■llll|
^
S VIDEO-^'
S VIDEO
cable
LINE OUT
AUDIO H AUDIO L VIDEO S VIDEO
Audio cable
Notes on Using This Connection
Watch the DVD player
Set up the TV remote control
to operate the DVD player
Activate the TV remote
control to operate the DVD
player
Control DVD functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This.
Press TVA/IDEO repeatedly to select the DVD input (VIDEO 1 in the
illustration).
If you have a non-Sony DVD player, you must program the remote control.
See "Programming the Remote Control" on pages 51-52.
Open the outside cover, as shown on page 50. Then set the A/V slide switch
to the position you programmed for the DVD player.
See "Operating a DVD Player" on page 54.
See the instructions for setting up Video Labels on pages 83-84.
38