Sony CDP-361 - Manual (Page 11)

Recording From CDs
Fading out at the specified time (Time Fade)
You can have the player fade out automatically by
specifying the playing time. Once you set the time fade,
it works twice, that is, the play fades out at the end of
both sides of a tape,
1 Press EDIT/TIME FADE repeatedly before you
start playing until " [¿™~j " and "A" in the
indication appear in the display.
2 Press IKKI-<^ or ►►1>C>11 to specify the playing
time.
Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.
. HALF C-46 C-54 C-60 C-74 »-
(23,00) (27.00) (30.00) (37.00)
♦ C-90<-
(45.00)
When you select "HALF"
The player sets the playing time to a half of the total
playing time.
Press O to start playing.
At the specified time the play fades out and the
player pauses. "B" in the indication appears
in the display.
To record on side B, reverse the tape and press O
or II on the player to resume playing.
Again, the play fades out at the specified time.
Adjusting the Recording Level
(Peak Search)
The player locates the highest level among the tracks to
be recorded to let you adjust the recording level before
you start recording.
■ PEAK SEARCH
1 Before you start playing, press PEAK SEARCH.
"PEAK" flashes in the display and the player
repeats the portion of the highest level.
2 Adjust the recording level on the deck.
3 Press ■ on the player to stop peak search.
"PEAK" disappears from the display.
Note
The portion with the highest level may differ every time vou
try the adjustment on the same disc. The difference is,
however, so slight that you won't find any problem in
adjusting the recording level precisely.
To cancel time fade
Press EDIT/TIME FADE.
y' You can freely specify the playing time
See "You can freely specify the tape length" on page 10.
You can change discs during time fade
If the play ends before the specified fade-out time, (for
example, when you record CD-singles on a tape) change
the disc. The specified fade-out time is counted only
during playing.
'Q' You can fade in to resume playing in Step 4
After you reverse the tape, press FADER.
11