Sony SLV-788HF - Manual (Page 11)

Hookup 1: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 76.
If you made A/V
connections (from page 8),
you can skip this step.
2
Turn on your cable box.
3
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS)
i f desired,
and press the joystick (OK). For details, see page
30.
© The CLOCK SET menu appears. Select AUTO
and press the joystick (OKÿ For details, see page
31.
O The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 38.
SET UP
LANGUAGE
►ENGLISH
ESPAÑOL
FRANÇAIS
NEXT
CANCEL
OK
EASY SET UP
SET UP
CLOCK SET
SELECT ◄/►
NEXT ; OK
CANCEL ; EASY SET UP
SETUP
CABLE BOX CONTROL
►CABLE MOUSE *ON OFF
BOX CODE NO. -----
BOX OUTPUT CH CH3
SELECT : ◄/►
CANCEL EASY SET UP
O Enter your cable box code number and push the
joystick to For details, see page 39.
© Select your cable box
output channel and
press the joystick
(OK).
SETUP
CABLE BOX CONTROL
CABLE MOUSE :CiN. ^ OFF
► BOX CODE NO. ----------- ------ -
BOX OUTPUT CH 'CH3'
ENTER YOUR CABLE BOX
CODE NO. USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
SETUP
CABLE BOX CONTROL
CABLE MOUSE *ON OFF
BOX CODE NO.
► BOX OUTPUT CH - CHs'" _
USE ◄/► TO SELECT CABLE
BOX CH. THEN PUSH OK
SET UP
SET UP IS DONE
Normal display
continued
Getting Started ! 11