Setting the clock, Using the auto clock set feature, Continued – Sony SLV-788HF User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the clock
Using the Auto Clock Set
feature
Some TV and cable channels transmit
time signals with their broadcasts. Your
VCR can pick up this time signal to
automatically set the clock.
The Auto Clock Set feature works only if
a channel in your area is broadcasting a
time signal. If broadcasters in your area
are not yet sending time signals, set the
time manually (page 36).
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the VCR channel
(channel 3 or 4). If your TV is
connected to the VCR using A/V
connections, set the TV to video input.
• Press TV/VIDEO to display the
VIDEO indicator in the VCR's display
window.
• Press INPUT SELECT so that a
channel number appears in the VCR's
display window.
MENU
- Joystick
OK
1
MENU pj.ggg
MENU, then push the joystick to
■f/4^ to move the cursor (►) to CLOCK
SET and press the joystick (OK).
•AUTO MANUAL
SELECT : •</►
THEN PUSH OK
QUIT . MENU
Push the joystick to
to select
AUTO, then press the joystick (OK).
AUTO CLOCK SET
FULL AUTO
SELECT
END
QUIT
OK
MENU
continued
Getting Started , 31