Presetting, Channels, Before you start – Sony SLV-788HF User Manual
Page 43: Presetting all receivable channels automatically, Continued, Presetting channels
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Presetting
channels
(Skip this section if you are
using cable box/DSS
receiver control.)
This VCR is capable of receiving VHP
channels 2 to 13, UHF channels 14 to 69
and unscrambled CATV channels 1 to
125, First, we recommend that you
preset the receivable channels in your
area using automatic presetting. Then, if
there are any unwanted channels,
disable them manually. If you have
decided which channels you wish to
preset, set them directly using manual
presetting.
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the VCR channel (channel 3 or 4). If your TV is
connected to the VCR using A/V connections, set the TV to video
input.
• Press TV/VIDEO to display the VIDEO indicator in the VCR's
display window.
MENU
Joystick
f/4,/4-/^/
OK
Presetting all receivable channels automatically
1
MENU
Press MENU, then push the joystick to ♦ /
to move the cursor (►) to TUNER
PRESET and press the joystick (OK).
When using the EASY SET UP procedure,
skip this step.
TUNER PRESET
CHI
ANTENNA/CABLE
ANT‘CABLE
AUTO PRESET
► MANUAL SET
ADD ERASE
AFT
ON OFF
FINE TUNING
Push the joystick to ♦ / to select ANTENNA/CABLE.
continued
Getting Started 43