Sony SLV-788HF - Manual (Page 60)

Setting the timer manually (continued)
INPUT
SELECT
CD
TIMER SET / CHECK 1 1 / 1 6 M O
START STOP CH
•J'- 1 6 M O — : - -- --SP
_ __
_ _ _ _
Set the date, start and stop times, channel
number and tape speed;
1 Push the joystick to ^ to flash each
item in turn.
2 Push the joystick to ♦/■!■ to set each item
To correct a setting, push the joystick to
to return to that setting and reset.
To record the same program every day or the same day every week,
push the joystick to ^ while the date is flashing. For details, see
"Daily/weekly recording" on this page.
To record from a source connected to the LINE 1 IN or LINE 2 IN
jacks, press INPUT SELECT to display "LI" or "L2" in the "CH"
position.
Push the joystick to ^ to confirm the setting.
The cursor (►) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
Press the joystick (OK).
• POWER Press POWER to turn off the VCR.
The © indicator appears in the display window and the VCR
stands by for recording. When using a cable box, leave it on.
Daily/weekly recording
In step 2 above, push the joystick to 4- to select the recording pattern. Each
time you push the joystick to 4, the indication changes as shown below.
Push the joystick to 4 to change the indication in reverse order.
the current date —► SU-SA —* MO-SA —► MO-FR —► EVERY SA —► —►
EVERY MO —♦ EVERY SU —► 1 month later —► (dates count down) —»the
current date
Tips
60
• To set the channel, you can also use the CH+/-, number buttons, or shuttle ring
during stop.
• To set the tape speed, you can also use SP/EP.
Note
• If you are using cable box control, you cannot select "LI" or "L2".
Basic Operations