Uick reference to using the vcr, Hookup 1, To play a tape – Sony SLV-788HF User Manual
Page 88: To record arprogram, To watch tv, To record a program, Hookup 3, Hookup 2, Hookup 4, Hookup 3 hookup 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q
uick reference to using the VCR
Hookup 1
To play a tape
1 S<.'t the TV to ch.iniiol T
4 (or to \ ii-loo input, if vou
made A / \’ connections. )
2 Insert a tape and press the
jovstick O.
To record arprogram
1 Turn on the cable box.
2 Press VCR Plus+ on the
remote commander.
3 Enter the program's
PlusCodc number.
4 Sc'lect ONÇE, DAILY, or
WEEKLY, then press SET.
5 Insert a tape.
6 Press POWER to turn off
the VCR.
7 Leave the cable box on.
To watch TV
1 Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Turn on your cable box.
3 Set the TV to the cable box
output channel (usually 2,
3, or 4).
4 Set the cable box to the
channel you want to
watch.
2 Insert a tape and press the
jor stick O.
To record a program
1 Press \’CR Plus+ on the
retnote commander
2 Enter the program's
PlusCodc number.
3 Select ONCE, DAILY, or
WEEKLY, then press SET.
4 Insert a tape.
5 Press POWER to turn off
the VCR.
To watch TV
1 Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Select the channel with
your cable box (if you have
one) or with your TV.
Hookup 3
Hookup 2
To play a tape
1 Tf you made A/V
connections, set the TV to
video input.
If you didn't use A/V
hookup:
• Turn on the cable box.
• Set the cable box to
channel 3 or 4.
• Set the TV to the output
channel of the cable box
(usually 2, 3, or 4).
If you have any questions about
1-800-222-SONY (7669) or write
#T1-I1, Park Ridge, NJ 07656
To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press the
joystick t>. If there's no
picture on your TV, press
the VCR's TV/VIDEO
button until the VIDEO
indicator comes on in the
display window.
To record a program
1 Press VCR Plus+on the
remote commander.
2 Enter the program's
PlusCode number.
3 Select ONCE, DAILY, or
WEEKLY, then press SET.
4 Insert a tape.
5 Press POWER to turn off
the VCR.
To watch TV
1 Turn oft the VCR, or press
the N CR's TV/VIDEO
button until the VIDEO
indicator in the displav
window
glX'S
off.
2 Set the T\' to the channel
vou want to watch.
Hookup 4
To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press the
joystick t>.
To record a program
1 Turn on the cable box.
2 Set the cable box to the
channel you want to
record.
3 Press VCR Plus+ on the
remote commander.
4 Enter the program's
PlusCode number.
5 Select ONCE, DAILY, or
WEEKLY, then press SET.
6 Insert a tape.
7 Press POWER to turn off
the VCR.
8
Leave the cable box on.
To watch TV
1 Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Turn on your cable box.
3 Set the TV to the cable box
output channel (usually 2,
3, or 4).
4 Set the cable box to the
channel you want to
watch.
this product, you may call:
Sony Customer Information Center
to:
Sony Customer Information Center
Sony Drive, Mail Drop
Sony Corpo'ration Printed in Malaysia