Sony MHC-RXD2 - Manual (Page 17)

1
Press FUNCTION repeatedly until
"CD" appears in the display, then
place Cite on the disc tray.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
3
Press one of the DISC 1-3 buttotrs
or DISC SKIP/EX-CHANGE
repeatedly to select a CD.
4 Press or repeatedly until
the desired track appears in the
display.
Disc number Track number
To cancel Program Play
5
Press ENTER/NEXT.
The track is programmed and the
program step number appears.
The last programmed track
6
To program additional tracks,
repeat steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press CD -----------
remote). ,
AU the tracks pUy in the order you
selected.
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To Press
Check the program CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
Clear a track from
the end CLEAR on the remote in
stop mode.
Clear a specific
track CHECK on the remote
repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
Add a track to the
program 1 Select a disc tray with a
DISC 1-3 button.
2 Select the track by
pressing \« or
repeatedly.
3 Press ENTER/NEXT.
Clear ttie entire
program ■ once in stop mode or
twice while playing.
Tips
• The program you made remams in the CD player
even after it has been played back. Press CD ►!!
to play the same program again.
• If appears instead of the total playing time
during programming, this means:
- you have programmed a track number
which exceeds 20, or
- the total playing time has exceeded 100 minutes.
17