To change the preset time, Step3: presetting radio stations, Step 3: presetting radio stations – Sony MHC-RXD2 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Press or repeatedly to set
the minute.
5
Press ENTER/NEXT.
The clock starts working.
To change the preset time
You can also change the time while the
system is on.
1 Press CLOCK/TIMER SET.
2
Press
or
repeatedly
until
"SET CLCXTK" appears, then press
ENTER/NEXT.
3
Repeat steps 2 to 5 in "Setting the time".
Tips
•
If you've made a mistake, start over from step 1.
• Setting the time deactivates the demonstration
mode.
if you want to display the demonstration mode,
press DISPLAY/DEMO when the system is off.
step 2: Setting the
time
(continued)
Step3: Presetting
radio stations
You can preset up to 30 stahons, 20 for EM
and 10 for AM.
l/(!)
(power)
2
2
1
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows;
FMs-eAM
2
Press and hold - or + until the
frequency indication starts to change
automatically, then release it.
Scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo program) appear.
TUNED ,
STiREO VOLUME
«1 eecsp.
r / 1
P c
a K j -Ht