Sony CFD-980 - Manual (Page 23)

Tip
You can have the
player go on the next
day at the same time.
Just press STANDBY
until the © indication
appears in the display.
The preset settings
remain until you reset
them.
Note
The timer mode is
canceled:
- when you press ►
button of the tape
player while music
plays in the timer
mode.
- when you select
"TAPE" using
FUNCTION.
6
Press TUNING/TIME SET +/- to set the volume,
then DISPLAY/ENTER «MEMORY.
, X I I I I I I I I I I I /
■Ac ' ' I ' n t 3 _t
-Yx z - f U t - !______ L
/ I I I I I I I I I I I X
f Press STANDBY.
The © indication lights up and the power goes oft.
At the preset time, the power will go on, and the
music will play. Then the power will go off at the
preset time, and the player will enter into the
standby mode.
To check/change when the playback will start
Press TIMER, then DISPLAY/ENTER «MEMORY.
Each time you press DISPLAY/ENTER«MEMORY, a
stored setting lights up. Change the setting if you need
to when the setting lights up.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer
playback will start at the preset time.
In case of the radio, however, if you listen to the
station which is different from the one you tuned in
in step 1 on page 22, you will hear that station at the
preset time. Make sure to tune in the station you want
to listeri to before you turn off the player.
To stop play
Press POWER.
ZT
n
3
(D
The Timer 23