Choosing the power sources (continued) – Sony CFD-980 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Choosing the power sources (continued)

Tip

Replace the batteries
when the OPR/BATT
indicator dims or
when the player stops

operating. Replace all

the batteries with new

ones. Before you
replace the batteries,
be sure to take out the
CD from the player.

Notes

• Use only the supplied

car battery cord (DCC-
EC9). Do not use any
other car battery cord.

Polarity of the plug

Use the supplied car
battery cord only with
a negatiye ©
grounded car that
uses a 12 V battery.
If the inside of the
cigarette lighter socket
is dirty with ashes,
etc., the plug of the car
battery cord may
become heated due to
a bad contact. Before
connecting the cord,
be sure to clean the
socket.
When listening to the
radio on this player,
the car battery cord
may cause noise.

E-xtend it as long as
possible, and keep it

as far away as possible
from the player.

m

Using the player on batteries

Insert six size D (R20) batteries (not supplied) into the
battery compartment.

To use the player on batteries, disconnect the AC

power adaptor from the player.

□ Using the player on car battery

Insert one end of the supplied car battery cord (DCC-
EC9) to the DC IN 9 V socket located on the side of the
player, and the other end to a cigarette lighter socket.

To a cigarette lighter socket

To replace the fuse of the car battery cord

Be sure to use the fuse with the correct amperage.
(4A, 125

V,

length 31.75 mm)

Plug end

Cigarette lighter plug

26

Setting Up

Advertising