To protect your hearing (avls), Connecting to other stereo equipment, To turn off the beep – Sony D-F415 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To protect your hearing (AVLS)

Tho AVLS (Automatic Volume Limiter
System) function keeps down the maximum

volume to protect your ears.

Sot AVLS to LIMIT.
The AVLS indication appears.

X * ^ ✓

Note

• If you use the SOUND function and the AVLS

function at the same time, sound may bo
distorted. If this happens, turn down the
volume.

To resume playing from the point
you stopped the CD (Resume Play)

Normally, every time you stop and play,
playing starts from the beginning of the CD.
The resume play function, however, lets you
listen to from the point where you last turned
off the player.

Connecting to other
stereo equipment

You can listen to the CD through other steret^
equipment or record a CD on a cassette tape.

Refer to the instruction manual of the other
equipment for details. Before making
connections, turn off each piece of equipment.

Notes

When you use a connecting cord, the SOUND

function will be disabled.

• Before you play the CD, turn down the volume

of the connected equipment so as not to
damage the connected speakers.

• The beep sound is not output from the LINE

OUT jack.

• When you cormect other equipment to the

LINE OUT jack of this player, adjust the
volume on the connected equipment.

• When you record a CD on a cassette tape using

a tape recorder that has the blank search
function, release the ESP function. If the ESP
function is on, the blank search function does
not work.

Set RESUME to ON.

To cancel resume play, set RESUME to OFF.

Notes

• Even if RESUME is set to ON, playing starts

from the beginning when you open the lid.

• The resume point may be inaccurate by about

30 seconds.

To turn off the beep

You can turn off the beep that sounds as you
operate your player.

Disconnect the power source (AC power
adaptor, rechargeable battery or alkaline
batteries). While you press and hold down ■ ,
connect the power source again. To make the
beep sound again, disconnect the power
source, and then connect it without pressing

Continue to the reverse side

Advertising
This manual is related to the following products: