Step 5: connecting the ir blaster, In front of the vcr, Connecting a sony smartfile^*^ vcr – Sony SAT-A50 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 5: Connecting the IR Blaster
O To allow the Digital Satellite
Receiver to control your
VCR
Connect the IR Blaster to the
VCR CONTROL jack on the
receiver.
In front of the VCR
Place the IR Blaster under and in
front of the VCR.
The IR Blaster must extend just in
front of the infrared sensor of the
VCR.
trip
•
If the infrared sensor is not marked
on your VCR, shine a flashlight
into the front panel of the VCR to
locate the sensor.
Connect the IR Blaster to allow the Timer & Rec feature to automatically
operate your VCR.
See "Setting Up the VCR Control Feature" on page 25 for information
about setting up the Digital Satellite Receiver to work with your VCR.
Digital Satellite Receiver
0
rD
(X> ,
n
o
<
rD
If you are using a Sony SmartFile
VCR to take advantage of the
Program Data Download feature
Use this connection instead of the
IR Blaster connection. For
information about setting up the
VCR Control feature, see page 25.
For details about the Program
Data Download feature, refer to
your SmartFile VCR Operating
Instructions.
Connecting a Sony SmartFile^*^ VCR
Digital Satellite Receiver
0
11