Turning on the power, Press the tv button to turn on the tv, N (b n – Sony SAT-A50 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Turning On the Power
Press the POWER SAT button to turn on the
Digital Satellite Receiver.
The POWER indicator lights up.
Press the TV button to turn on the TV.
' -#<1
Select the TV's input source to which you
connected the Digital Satellite Receiver.
Depending on how you connected your Digital Satellite Receiver
to your TV the input source could be channel 3 or channel 4, or
you may need to use the TV /VIDEO button to select one of the
A/V input sources.
•
• FUNCTION ■
TV
n (b n
V'Tip
The FUNCTION button indicators
light up to show you which
equipment the remote control is
operating.
Note
You may need to set up the remote
control to operate your other audio/
video equipment. See "Setting Up
the Remote Control" on page 65 for
details.
To make sure you are viewing satellite pictures
Press the SAT FUNCTION button, then press the MENU button
to open the Main Menu.
SAT
'#
^
i\ Pf.iocifici
•r ili'i e
lx.i (i,‘i;.KSo,i:M>i
$
^
f
If the Main Menu does not appear, turn off your equipment,
check your connections and repeat from step 1.
Press the EXIT button to close the Main Menu.
Si
CL n‘
cn
J® hrl
C£. o
< 3
c
19