3 select "yes, 4 select a different security code, Press the code set button on the remote control – Sony SAT-A50 User Manual
Page 33: Press the enter button, Q8 select "ok" to save your changes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3 Select "Yes".
The RF Security Code pop-up appears.
4 Select a different security code.
The conformation pop-up appears.
Press the CODE SET button on the remote
control.
The CABLE and TV FUNCTION indicators flash.
CODE SET
\1/ \l/
1
cl
:) Q Q
6 Enter the three digit security code you
selected for the receiver in step 4 above.
Note
If the remote control no longer
operates your Digital Satellite
Receiver after completing this
procedure, use the controls on the
front panel to open the Remote
Control display (page 31). Then
repeat the steps in "Setting the
Security Code" to try again.
Press the enter button.
The remote control and Digital Satellite Receiver are now set to a
new security code.
ENTER
Q
8 Select "OK" to save your changes.
The Remote Control display appears.
33