Sony SPP-A450 - Manual (Page 21)

Memoi^ dialing
You can store the
numbers you frequently
call into the memory so
that you can dial a
number with the touch of
two buttons. While
storing a number, you
cannot receive calls.
SPEED DIAL/-
PROGRAM
-<3D — O)
Storing memory dialing numbers
If more than 20 seconds elapse
between pressing buttons, the
operation will be canceled and
you must start over again.
I•
Do not enter a memory dialing
number that exceeds 16 digits
(the tone and pause digits are
each counted as one digit);
otherwise you will hear five
short error beeps and you must
start over again.
Make sure that the handset is in RING ON mode,
f Press SPEED DIAL/PROGRAM.
2 Press a dialing key between 0 and 9.
You will hear a confirmation beep.
3
Dial the phone number you wish to store.
4
Press SPEED DIAL/PROGRAM.
You will hear a confirmation beep.
■ If you use a Private Branch Exchange (PBX)------------------------------
You need to dial a digit (such as 9) to access an outside line
before you dial a phone number.
To store the phone number:
1 Enter the outside line access digit.
2 Press REDIAL/PAUSE to enter a pause (to allow the
phone time to access the outside line).
3 Enter the phone number you want to store.
■ To change a stored number--------------------------------------------
If you store a new phone number in a memory dialing
button that already has a number stored in it, the old
number will be erased.
Using as a telephone \ 21