Sony SPP-A450 - Manual (Page 37)

Operating the answering machine from a touch-tone phone
I
■
If 20 seconds elapse without
pressing a control code, the line
will be discorunected.
1
Call your phone from a touch-tone phone.
2
When you hear the greeting, press CD, then
your security code (page 36).
If there are messages which have not been played back
yet, you will be informed by voice (SPP-A450) or by
beep sound (SPP-A250).
■ If you did not turn on the answering machine
Your phone will pick up after 10 rings. Press CD and
your security code.
3
Press dialing keys for the desired operation
command within 20 seconds.
4
When you finish, disconnect the line.
Table of control codes
Operation Press: Notes
to play back messages (DC2) See page 30.
to repeat messages CDCD Press during playback. See page 30.
to skip messages CDC3) Press during playback. See page 30.
to clear messages CDCD See page 31.
to record memo message CDCD See page 34.
to stop recording CDCD See pages 28 and 34.
to check the day of the week
and time
CDCD SPP-A450 only. See page 27.
to record your greeting CDCD See page 28.
to check your greeting CDCD See page 28.
to turn on answering
machine DCD See page 29.
to turn off answering
machine CDCD —
Remote control function \ 3