Locating a specific track, V' to pause playing at the beginning of a track, Y'to go quickly to the beginning of the last track – Sony MDS-JE510 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing MDs
' You can check the track name at any time while
playing an MD
Press SCROLL.
Since the display shows up to 12 characters at a lime,
press SCROLL again to see the rest of the track title if
the title has 13 characters or more.
Press SCROLL again to pause scrolling, and again to
continue scrolling.
Locating a Specific Track
You can quickly locate any track while playing a disc
by using AMS (Automatic Music Sensor), and
►►I, number buttons or M.SCAN on the remote.
, Number
buttons
• M.SCAN
*0' When you directly locate a track with a number over
2 5 1
]
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter "0," press button 10.
Examples: • To play track number 30
Press >25 once, then 3 and 10.
• To play track number 100
Press >25 twice, then 1,10 and 10.
'Q' You can extend the playing time during music scan
m
While the deck is slopped, press M.SCAN repeatedly
until the playing time you want (6, 10 or 20 seconds)
appears in the display. Each press changes the time in
order of 6 to 20, then from 6 again.
V' To pause playing at the beginning of a track
Turn AMS (or press or ►►!) after pausing
playback.
Y'T
o
go quickly to the beginning of the last track
Turn AMS counterclockwise (or press ) while the
display shows the total track number and total disc
playing time, remaining recordable time of the disc, or
disc name (see page 16).
To locate
Do the following:
The next or
succeeding tracks
During playback, turn AMS clockwise
or press ►W repeatedly until you,
find the track.
The current or
preceding tracks
During playback, turn AMS
counterclockwise or pr^ss
repeatedly until you find the track.
A specific track
directly [J]
Press number buttons to enter the
track number.
A specific track by
using AMS
1 Turn AMS until the track number
you want to locate appears while
the deck is stopped. (The track
number is flashing.)
2 Press AMS or C>-.
By scanning each
track for 6 seconds
(music scan) U|
1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press C> to start playing.
17