Sony RM-V15 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 2: Checking if the Code
Number Works
1 Power on the component you want
to set up using the component’s
powerswitch.
2
Aim the Remote Commander at the
component and press the POWER
button.
POWER ^
The component should power off.
When the component
powers off, check that
the Commander is
operating the other
functions of your
component, such as
channel and volume
control.
11
Advertising