If you press a wrong button in step 3 – Sony RM-V15 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENTER
4 Press and release the
ENTER button to store the
code number in the
Commander's memory.
To finish setting up the component, go
to "Step 1; Entering the Code Number"
on page 9 in step 2 to 6 and complete
the procedures that are described.
If you press a wrong button in
step 3
Press and release the S (Set) button.
Then enter the correct code number
and press and release the ENTER '
button.
Searching for the Correct
Code
If you've tried all the code numbers
listed for your component and you still
cannot get the Commander to work, try
these steps:
1
Using the component's original
remote control (or the power switch
on the component itself), power
on/off the component.
Turn the power of the TV or cable
box on and the VCR off.
14