Sony RM-V15 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the Commander Doesn't Seem
to Be Working...
■ First, try rep>eating these setup
procedures using the other codes
listed for your component (see
page 21).
■ If — after trying all the codes listed
for your component — you still
cannot get the Commander to work
properly, try the search method
described under "Searching for the
Correct Code" on page 14.
■ If you still caimot get the
Commander to work properly, see -
"Troubleshooting" on page 25.
: c?
If the Commander Seems to Be
Working Properly...
■ You're finished setting up the
Commander for this component.
■ If you're setting up more than one
component (or a TV/VCR
combination), you'll need to
complete these procedures for each
component you plan to use with the
Commander.
■ Use the label (supplied) to write
down the code numbers of your
components. Then affix the label to
the back of the Commander.
12