About this remote commander, If you do not have sony components – Sony RM-V15 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About This Remote
Commander
This Remote Commander can operate
any of the following video components.
If you're using this Commander with a
Sony brand TV, a Sony brand VHS
VCR and a Sony brand 8 mm VCR, you
won't need to preset the Commander
before you start using it. However, you
will need to set up the Commander if
you have a cable box. Each component
is assigned a different position on the
Commander's slide switch:
Component Type
Position
Facto
Prese
■
TV
TV*
Sony TV
VCR
VCR*
Sony VHS
VCR
Cable box
CBL
-
in
Second TV, VCR or
Cable box
OPT*
Sony 8mm
VCR
* You can assign your TV/VCR combo
to any of these positions.
If You Do Not Have Sony
Components...
You'll need to follow the instructions in
this booklet to preset the Remote
Commander with the correct code
numbers for each of your components.
Setup procedures begin on the next
page.
7