Sony STR-DE935 User Manual
Fm stereo fm-am receive
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- FM Stereo FM-AM Receive
- Precautions
- About This Manual
- fioDking^Upi the
- Unpacking
- Antenna Hookups
- Audio Component Hookups
- Video Component Hookups
- 5.1 CH Input Hookups
- other Hookups
- and Setting Up ¡the Speaker System
- Speaker System Hookup
- Performing Initial Setup Operations
- Multi Channel Surround Setup
- Specifying the S|M"aKir parthiiten
- 1 Press 1/(1) to turn on the receiver.
- 2 Press SET UP.
- Press the cursor buttons « or » to select the parameter you want to adjust.
- 4 Turn the jog dial to select setting you desire. The setting is entered automatically.
- Repeat steps 3 and 4 until you have set all of the parameters that follow.
- Ç About speaker distances
- ■ Distance unit (DIST. UNIT)
- Adjusting thй п^alcer volume
- Specifying the S|M"aKir parthiiten
- Before You Use Your Receiver
- Location of Parts and Basic Operations
- Q] l/(!) switch
- O Function buttons
- о
- ft
- o'
- о
- Д
- a
- ] INPUT MODE button
- g] 5.1CH INPUT button
- [U MASTER VOLUME control
- [U MUTING button
- [7] SPEAKERS selector
- PHONES jack
- ] 2ND AUDIO button
- I DISPLAY button
- B9 DIMMER button
- A.F.D. button / indicator
- MODE button / indicator
- 2CH button / indicator
- M MULTI CHANNEL DECODING indicator
- 01 BASS BOOST button
- Ш EQUAUZER button
- When you want to listen to an analog source without any digital processing
- DIRECT- button
- SHIFT button
- Numeric buttons (1 to 0)
- AM button
- FM button
- FM MODE button
- MEMORY button
- TUNING +/- buttons
- PRESET */- buttons
- O LEVEL button
- m SUR button
- m EQ button
- IS Cursor buttons «/»
- HI Jog dial
- о
- о.
- Surround
- Sound
- A.F.D.
- Brief descriptions of buttons used to enjoy surround sound
- Selecting a Sound Field
- Understanding the Multi-Channel Surround Displays
- Source sound displays
- m
- Adjusting the level parameters
- Adjusting the fSȣ
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press EQ.
- 3 Press the cursor buttons « or »to select the parameter you want to adjust.
- 4 Turn the Jog dial to select setting you desire. The setting is entered automatically.
- V You can turn off the equalization without erasing it
- Resetting customized sound fields to the factory settings
- Adjustable parameters for each souiidAefd'nm;: i»-»? :e~; '
- о.
- Receiving
- Broadcasts
- •
- Brief descriptions of buttons used to receive broadcasts
- Direct Tuning
- 1 Press TUNER to light the button up.
- 2 Press FM or AM to select the FM or AM band.
- 3 Press DIRECT.
- 4 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz
- Example 2: AM 1350 kHz
- 5 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
- 6 Repeat Steps 2 to 5 to receive another station.
- 9 If you try to enter a frequency that Is too precise for the tuning scale
- Automatic Tuning
- 1 Press TUNER to light the button up.
- 2 Press FM or AM to select the FM or AM band.
- 3 Press TUNING + or TUNING -.
- Presetting radioitatlon$ <£;
- 1 Press TUNER to light the button up.
- 2 Tune in the station that you want to preset using Direct Tuning (page 44), or Automatic Timing (this page).
- 3 Press MEMORY.
- 4 Press SHIFT to select a memory page (A, B or C).
- 5 Select a preset number by pressing it (0 to 9).
- 6 Press MEMORY again to store the station.
- 7 Repeat Steps 2 to 6 to preset another station.
- To change a preset number to another station
- Tuning to preset stations
- Brief descriptions of tnittons that appear in this chapter
- Naming Preset Stations and Program Sources
- Recording
- Using the Sleep Timer
- Adjustments Using the SET UP Button
- Aaditional
- Information