Sony STR-DE935 - Manual (Page 9)

Digitai Component Hookups
X
о
о
ж*
S'
<0
?
э
■в
о
3
« 3
СГ
Connect the digital output jacks of your MD or DAT deck
to the receiver's digital input jack and connect the digital
input jacks of your MD or DAT deck to the receiver's
digital output jack. These coimections allow you to make
digital recordings of a CDs played back through your
DVD (or LD player) and satellite broadcasts.
ii«c|uir0Ci Coras
Optical digital cords (not supplied)
Black ■4T>a== JQ!^ Black
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins t
the appropriate jacks on the components.
White (L)
Red (R)
Notes
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• To make a digital recording from your CD player, connect the CD player's digital output directly to the digital input on your MD or DA
deck. Refer to the instructions si^pplied with yourjCD player and MD or DAT deck for details.
• The DVD/LD OPT and COAX jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling frequencies.
• The TV/SAT OPT jack and MD/DAT IN and MD/DAT OUT OPT jacks are compatible with 48 kHz, 44.1 kHz, and 32 kHz sampling
frequencies.
• It is not possible to record analog signals to TAPE and VIDEO with only digital connections. To record analog signals, make analog
connections. To record digital signals, make digital connections.
• Input signals with 96 kHz sampling frequencies to the DVD/LD OPT or COAX jacks. Using other jacks may result in intermittent sound
10