Mounting the base unit on a wall, Maintenance – Sony SPP-SS951 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting the base unit on a wall
1
Reverse the hang-up tab.
2
Plug the telephone line cord to the LINE jack and the -AC power
adaptor to the DC IK 9\’ jack, and hook the cords. Use the shorter
cord for mounting.
3
Attach the %s’all bracket to the center ot the base unit .Aiigtt the A
marks of the wall bracket rvith those of the base unit.
4
Plug the telephone line cord to the telephone outlet and hook the
base unit to the wall plate.
5
Plug the AC power adaptor to an AC outlet. Then raise the antenna so
that it points towards the ceiling.
Tip
To remove the wall bracket, press the lower tabs.
Maintenance
• Clean the cabinets with a soft cloth slightlv moistened with water or a mild
detergent solution. Do not use any t\-pe of abrash e pad. scouring powder or
solvent such as alcohol or benzine as the\' ma\' damage the finish of the
cabinet.
• If the charge terminals of the base unit and handset are soiled, wipe them with
a soft cloth or paper.
If you have any questions or problems concerning vour phone please consult
your nearest Sony dealer.