Sony KP-61S65 - Manual (Page 17)

Press ♦ or ♦ to move the cursor (►) to the
symbol showing the line you want to
adjust, and press GD ■
CONVERGENCE
► +RED
+ BLUE
OMENU
+
Use aBBiB E» I I ii
+RED : Red vertical and horizontal line (left/right/up/
down adjustment)
+BLUE :Blue vertical and horizontal line (left/right/up/
down adjustment)
Press ♦, ♦, or ♦ to move the line until it
converges with the center green line, and
press GD.
CONVERGENCE
£D
To move Press
Up *
Down ♦
Right
Left
♦
6 Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7 Press MENU to return to the original screen.
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON (the factory setting). If not,
set CABLE to OEE.
You do not have to do this procedure if you perform
AUTO SET UP (page
14). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press ♦ or ♦ to select
a, and
press
GD.
3
Set CABLE to ON or OFF:
(1) Press ♦ or ♦ to move the cursor (►) to CABLE,
and press
GD.
(2) Press ♦ or ♦ to select ON or OEE, and press
GD.
SETUP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
. FAVORITE CHANNEL
____ ►CABLE : OFF
AUTO PROGRAM
^ VIDEO LABEL
TEn LANGUAGE : ENGLISH
CONVERGENCE
-----1 DMENU _
Use [*)|>! ffl Exit ED
4
Press MENU to return to the original screen.
Note
• If CABLE appears in gray, the projection TV is set to a video
input and you cannot select CABLE, Press ANT (black button)
so that a channel number appears.
Getting Started 17-EN