Sony KP-61S65 - Manual (Page 28)

Choose To
ON Listen to the sound from the
projection TV.
OFF Turn off the projection TV speaker
sound and
listen to the projection
TV's sound solely through the audio
system speakers.
SAVA SP Turn off the projection TV speaker
sound and listen to the^rojection
TV's sound through the Sony SAVA
series speaker system. You can adjust
volume, muting, surround modes,
and super woofer mode with the
remote control supplied with the
projection TV,
To select surround sound or super
woofer mode of the SAVA speaker
system
After setting SPEAKER to SAVA SP, follow the
procedure below.
Press 4 or to select SURROUND MODE or
SUPER WOOFER MODE, and press @.
For details on each option, refer to the operating
instructions of the speaker system.
SURROUND MODE
SUPER WOOFER MODE
DMENU
m Œ) Exit ED
Note
• This feature is only for Sony SAVA speaker system with an
operation capability for KP-41T65, KP-41T65C, KP-46C65,
KP-48S65, KP-53S65, KP-53S65C, KP-61S65, and KP-61S65C.
Setting audio out
(AUDIO OUT)
You can change AUDIO OUT to VARIABLE or FIXED
when SPEAKER is set to OFF.
AUDIO OUT is variable when SPEAKER is set to ON.
o ® o
0©
1
Press MENU.
2
Press 4 or 4 to select j', and press GD-
3
Press 4 or 4 to select AUDIO OUT, and press
(m) AUDIO
EFFECT: SURROUND
MTS ; STEREO
SPEAKER OFF
AUDIO OUT : FIXED
'OMENU ^
Use 0® ffl Exil 03
4
Press 4 or 4 to select VARIABLE or FIXED,
and press QD-
I
(m) I a UDIO
B balance INI
EFFECT ; SURROUND
MTS : STEREO
SPEAKER ; OFF
Q »AUDIO OUT : VARIABLE
©
Exit 03
VARIABLE: Sound output varied according to the
projection-TV settings. You can adjust
the volume, bass, treble, and balance.
FIXED: Sound output is always fixed to a certain
level. The volume, bass, treble, and balance
are also fixed to the factory settings.
5
Press MENU to return to the original screen.
Note
• If AUDIO OUT appears in gray, set SPEAKER to OFF.
20-EN Operations