Sony MHC-RXD9 - Manual (Page 15)

To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press + or - repeatedly.
For automatic tuning, press and hold + or
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play). When the
system is in the Power Saving Mode, the One
Touch Play function does not work.
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an EM program is noisy, press
STEREO/MONO so that “MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (Cr02) tapes. The
recording level is automatically adjusted.
l/(!)
1
(Power) DOLBY NR
!S.
ft*
0
1
■1
fif
5’
3
lA
2 '4,6 3
1
Press TUNER / BAND to select the
band you want.
2
Turn the jog dial to tune in a preset
station.
Turn counter­
clockwise for
lower preset
numbers.
Turn clockwise
for higher
preset numbers.
Preset number Frequency
r |i d • i’ U I II I I •'
T i l I L I I - J I _ !
continued
15