To check the setting, To cancel the timer operation, Optional av components – Sony MHC-RXD9 User Manual

Page 41: Connecting audio components, Connecting an md deck for digital recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

' Set the time to start recording.

Turn the jog dial to set the hour, then
press ENTER/NEXT.
The minute indication starts flashing.

©:

I I I. I I M

I" I

1

I I I I "

6

7

Turn the jog dial to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.

Set the time to stop recording
following the above procedure.
The start time appears, followed by the
stop time, the preset radio station to be
recorded (e.g., "TUNER FM 5"), then the
original display appears.

Insert a recordable tape.

Turn off the power.
When the recording starts, the volume
level is set to the minimum.

To check the setting

Press TIMER SELECT and turn the jog dial to
select "REC", then press ENTER/NEXT.

To change the setting, start over from step 1.

To cancel the timer operation

Press TIMER SELECT and turn the jog dial to
select "TIMER OFF", then press ENTER/
NEXT.

Note

If the power i.s on at the preset time, the recording
will not be made.

Optional AV components

Connecting audio
components

Select one of the following cormections,
depending on the equipment to be connected
and method of connecting. Refer to the
instructions of each component.

Connecting an MD deck

for digital recording

You can record from CD into the MD deck
digitally by connecting an optical cable.

To the DIGITAL IN jack of the MD deck

continued

41

Advertising