Maintenance, Fuse replacement, Cleaning the connectors – Sony CDX-4180 User Manual
Page 12: Dismounting the unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance
Fuse replacement
When replacing the fuse, be sure to use one
that matches the amperage described on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Fuse (10 A)
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the uiut.
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. To prevent this, open the
front panel by pressing (RELEASE), then
detach it and clean the coimectors with a
cotton swab dipped in alcohol. Do not apply
too much force. Otherwise, the connectors may
be damaged.
Dismounting the unit
Release key
(supplied)
Pull the unit out while the release key is inserted.
Press the dip inside the front cover with a thin
screwdriver, and lever the front cover free.
Back of the front panel
12