Sony MDP-A500 - Manual (Page 16)

How to Resume Playback—^Auto Resume (only for LDs)-
This function can only be used for LDs. Even if you press STOP (■) or POWER to stop
playback, you can still continue viewing horn the scene you stopped at.
To View From the Scene You Stopped at
1 Press STOP (■) or POWER to stop
playback.
STOP
D or
POWER
The AUTO RESUME
indicator on the front
( ^ panel lights up and the point you stopped at is
stored.* When you press POWER, the indicator
ayeror emo ) Ughts up briefly, then goes off with the power.
2 Press PLAY (►).*
PLAY
The AUTO RESUME indicator lights
up
as the
player searches for the scene where you
__________ stopped playing, then playback starts. If you
rpiauor or Romof > just before starting, press
(Player or Remote) PLAY(^).
* The point where you stopped playing is cleared when:
-you press OPENICLOSE (±), (DISC)SIDE A/B or ACSIAMS
-you carry out Chapter Search or Frame/Time Search.
** When the power is off, press PLAY(^) on the Front Panel. The player turns on automatically and resumes playback. When you
use the Remote Commander, press POWER, then PLAY (■►).
How to Search for a Particular Point on a Disc-
To find a particular point, play the disc in reverse or forward at high speed.* The sound
is automatically muted while scanning an LD.** You can monitor sound while scanning
a CD. Locate the SCAN
buttons on the Remote Commander.
To Scan in Forward or
Reverse...........................
SCAN
CSD ŒE)
Hold down SCAN (►►) on the Remote
Conunander to forward scan.
Hold down SCAN (<d) to scan a disc in
reverse.
To Resume Normai
Playback...................
Release SCAN or bP’).
* A certain amount of visual noise and instability is inevitable while scanning an LD or the video section of a CDV.
•* When scanning aCLVLD or the video section of a CDV, frames are skipped.