Sony MHC-RX33 - Manual (Page 22)

Selecting tape length
automatically
—rape Select Edit
You can chock the most suitable tape length
for recording a CD. Note that \ ou cannot use
Tape Select Edit for discs containing over 20
tracks.
Z
DISC SKIP
1
Recording CDs by specifying the
track order (continued)
3
Press ■
deck A.
and insert a blank tape in
4,7 3,6 5,8
4 Press # on deck A.
Recording starts.
5
Press CD ►ll.
The CD player starts plaving the tracks
to be recorded on side A.
When the last track for side A finishes
playing, the CD plaver changes to
playing pause automatically.
6
Remove the tape from deck A, and
insert it again with the side B facing
forward. Then rewind the tape
completely.
7
Press # on deck A.
Recording starts for side B.
8
Press CD ►II.
The CD player starts playing the tracks
to be recorded on side B.
Note
You cannot use this function after programming.
In order to use this function, you must first erase the
program (see "Clear the entire program" in the table
on page 20),
Place a CD on the disc tray.
If the disc number you want to record is
not displayed, press DISC SKIP
repeatedly so that it appears.
Press EDIT.
The required tape length for the
currently selected CD appears, followed
by the total playing time for sides A and
B respectively.