Step 2: setting the time, To change the preset time – Sony MHC-RX33 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting the
time
You must set the time before using the timer
functions.
You can set the time while the power is off.
For European models, the clock is on a
24-hour system.
For other models, the clock is on a 12-hour
(AM/ FM) system.
The 24-hour system model is used for
illustration purpose.
DISPLAY/DEMO
3,5
2,4
1
Press CLOCK / TIMER SET.
The hour indication flashes.
3
Press ENTER/NEXT.
The minute indication flashes
A A .
' ’ J I M
L /
LI
n
4
Press or repeatedly to set
the minute.
5
Press ENTER/NEXT.
The clock starts working.
To change the preset time
You can also change the time while the power
is on.
1
Press CLCX:K/TIMER SET.
2
Press or repeatedly until "SET
CLOCK" appears, then press ENTER/
NEXT.
3
Repeat steps 2 to 5 in "Setting the time".
Tips
• If you've made a mistake, start over from step 1.
• Setting the time deactivates the demonstration
mode.
If you want to display the demonstration mode,
press DISPLAY/DEMO when the power is off.
Lu-Ji/
u
2
Press or
the hour.
repeatedly to set
V ^ 4
- / (."XD
n
J\0 u
r
"y ^----------