Sony STR-D665 - Manual (Page 9)

Receiver Operations
To Do this
Mute the sound Press MUTING. Press again to
restore the sound
Reinforce the bass Press BASS BOOST to turn on
the BASS BOOST indicator.
Adjust the balance Turn the BALANCE control left
or right.
Adjust the tone quality Adjust the BASS and TREBLE
controls.
'Q' When you listen with headphones
Connect the headphones to the PHONES jack and set the
SPEAKERS buttons to OFF.
1 Press one of the SYSTEM CONTROL/FUNCnON
buttons to select the component you want to use.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To listen to Press
Records PHONO
Radio programs TUNER
Compact discs (CD) CD
Audio tapes TAPE/MD
VHS Video tapes
(VTR-3 mode) VIDEO
TV programs TV/LD
Watching video programs
When you watch TV or video programs, we
recommend you play audio portion through the
receiver instead of your TV's speaker. This lets you
take advantage of the receiver's surround sound
effects, like Dolby Surround and lets you use the
receiver's remote to control the audio.
Turn off the speakers on your TV before you start so
you can enjoy the surround sound from your receiver.
To watch TV programs, turn on both the TV and the receiver
and press the TV button on the receiver.
To watch videos or laser discs, do the following:
1 Press a function button to select the component (for
example, VIDEO).
2 Turn on the TV and set the TV's video input to
match your video component.
3 Turn on the component (VCR or LD player), and
start playback.
Using the remote Ll
The remote lets you operate the receiver and the Sony
components that are connected to it.
SYSTEM
OFF
TV CONTROL
ON
. SYSTEM
CONTROL/
FUNCTION
If you want to change the factory setting of a button,
see page 10.
The receiver and the selected component turn on.
If the component does not turn on
Press the power switch on the component.
2 Start pla)dng.
Refer to "Remote Button Descriptions" on page 19
for details.
To turn off the components
Press SYSTEM OFF. You can turn off the video and audio
components connected to the SWITCHED AC OUTLET at the
same hme.
'Q' If you use a Sony TV
When you press TV to watch a TV program, the TV turns
on and switches to the TV input. The TV also turns on
when you press VIDEO or TV/LD and switches to the
appropriate video input.
If the TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
■Q' When you watch TV without using the receiver (only
for Sony TVs)
Press TV CONTROL to set the remote to operate only the
TV. When you press this button, the TV turns on and
switches to the TV input. If the TV does not switch to the
TV input automatically, press TV/VIDEO.