Sony D-ES52CK - Manual (Page 10)

^Installing in a car
Where to place your
player
• Install the player in a location which:
- does not interfere with your driving.
- is not dangerous fdfpassengers.
- does not interfere with the glove box lid
or ashtray.
- is stable, and where nothing around it may
interfere with installation.
• Do not install the player near heat sources or
where subject to direct sunlight, excessive
dust, or moisture (especially on a dashboard.)
Please understand that we will not incur any
obligations for troubles caused by incorrect
installation.
If you have any questions or problems
concerning your unit, please contact your
nearest Sony dealer.
Mounting your player
Replacing the fuse of the
car battery cord
If the player does not operate, check the fuse.
If it is blown, replace it as follows:
1 Turn off the placer and remove the
cigarette lighter plug from the cigarette
lighter socket.
2
Remove the plug end by turning it
counterclockwise.
3
Remove the defective fuse from the plug.
4
Insert the supplied spare fuse into the
plug.
5
Replace the plug end by turning it
clockwise.
Plug end Cigarette lighter plug
Attach the player to the console box with the
supplied Velcro tapes.
Bottom of the player
Notes
• Do not affix Velcro tapes to the name plate or
the lid of the battery compartment.
• When you are going to park your car for a long
period of time, remove the player from the
Velcro tapes so that it will not be exposed to
direct sunlight.
To route the cord
Use the supplied spiral tube to route the cords
so that they do not interfere with your
driving.
Notes
• Be sure to use the supplied spare fuse. Never
use a piece of wire as a substitute for the fuse.
• If the fuse is blown again after replacing it,
contact your nearest Sony dealer. In such a case,
bring the supplied spare fuse to the dealer with
you.
Notes on the car
connecting pack
• If no sound is heard or the car connecting
pack is ejected, change the direction of
playback on the car cassette deck.
• Never insert the cord end of the car connecting
pack into the cassette insertion door. Otherwise,
the cord may break or the car cassette deck may
be damaged.
• You cannot use the car connecting pack with
some car cassette deck.
• The cord should be placed so that it does not
hinder drivjng.
• To disconnect the cord from the player, pull
it out by grasping the plug. Never pull the plug
out by the cord.
• With some car cassette decks, you may hear
some rattling noise from the car connecting
pack. However, this is not a sign of
malfunction.
Note on the car battery cord
The 4.5V DC plug supplied with car battery cord
conforms to the proposed standards of the
Electronic Industries Association of japan (EIAj).
Do not connect it to other players.
Polarity of the plug
(EIAJ standards)