To cancel time fade, To display the time remaining until the set time, When play ends within the designated period – Sony CDP-211 User Manual
Page 21: To cancel the peak search, On peak search, Peak search, Fading out at the desired time - time fade
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fading Out at the
Desired Time
- Time Fade
To cancel time fade
Press EDIT/riME FADE again.
Time fade is aiso cancelled when
◄◄ or ►► is kept pressed.
To display the time remaining until
the set time
Press TIME twice.
When play ends within the designated period
Time fade function is kept active. Change discs
and start play. When the total playing time of the
discs reaches the designated period, the unit
pauses by fading out.
Locating the Portion
with the Highest Level
- Peak Search
I
PEAK SEARCH
You can locate the portion with the highest
input level of the disc to adjust the
recording level.
Before starting play, press PEAK SEARCH.
“PEAK” flashes in the display as the peak
search begins functioning.
Upon completing the search, the unit starts
repeating the portion with the peak volume
so that you can adjust the recording level.
To cancel the peak search
- Press ■. “PEAK” goes off from the
display.
-Press II once to put the unit into pause
mode at the beginning of the first
selection.
-Press
>■
to start play from the first
selection.
On peak search
The unit scans input levels of the whole disc and
determines the peak (maximum input level)
among them. The peak determined with this
function is sometimes slightly different from the
real one. In addition, portions determined as a
peak vary each time this function is carried out
on the same disc. The difference between the
determined and the real peak is however,
negligible and will not prevent you from adjusting
the recording level.
21