Compaq Deskpro 2000 User Manual
Page 260
Compaq Deskpro 2000 Series of Personal Computers
H-3
Table H-2 shows which configurations of ×8 and ×32 DIMMs are supported.
Table H-2
Supported Memory Configurations
DIMM SLOT
Supported
1
2
3
Configuration
Ч8
Ч8
Ч8
Yes
Ч8
Ч8
Ч32
No
Ч8
Ч32
Ч8
Yes
Ч8
Ч32
Ч32
No
Ч32
Ч8
Ч8
Yes
Ч32
Ч8
Ч32
No
Ч32
Ч32
Ч8
Yes
Ч32
Ч32
Ч32
Yes
None
Ч32
Ч8
Yes
×32
None
×8
Yes
None
Ч8
Ч32
No
×8
None
×32
No
Note: ×4 DIMMs are not supported in any slot or configuration.
With a ×32 DIMM in slot 3, a ×8 DIMM is NOT supported in either slots 1 or 2. All other
combinations of DIMMs (with the exception of the ×4’s) are supported.
If the ROM encounters a ×4 DIMM or any of the unsupported Ч8/Ч32 combinations in the system
during POST, the ROM will issue a “213 – Incompatible DIMM in Slot x,x,x” error message and halt
the processor (the system will not boot). The “x” in the error message equals the slot number(s) of
the incompatible DIMM(s). If an unsupported configuration is found, the solution is to replace the ×4
DIMM or move the Ч8/Ч32 DIMMs into a supported configuration.