Casio CLASSPAD 330 3.04 - Manual (Page 588)

20060301
Example 1: To insert a Geometry data strip
S ClassPad Operation
(1) From the eActivity menu, tap [Insert], [Strip], and then [Geometry].
• This inserts a Geometry data strip, and displays the Geometry window in the lower
half of the screen.
10-3-7
Inserting Data into an eActivity
(2) On the Geometry window, draw the figure you want.
• For details about Geometry window operations, see Chapter 8.
Geometry data strip
Geometry window
(3) After you finish performing the operation you want on the Geometry window, tap R,
or tap and then [Close] to close the Geometry window and return to the eActivity
window.