Casio CLASSPAD 330 3.04 - Manual (Page 675)

20060301
PlotOff
Syntax: PlotOff : < x -coordinate>, < y -coordinate>
Function: Turns off display of the plot at the specified coordinates.
PlotOn
Syntax: PlotOn : < x -coordinate>, < y -coordinate>
Function: Turns on display of the plot at the specified coordinates.
plotTest(
Syntax: plotTest(< x -coordinate>, < y -coordinate>)
Function: Returns 1 when the dot at the specified coordinates is on, and 0 when it is off.
Example: plotTest(2,–3)2
Description: Only dots within the screen are valid.
PTBrokenThck
Syntax: PTBrokenThck : <graph number>
Function: Specifies “Broken Thick” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTCross
Syntax: PTCross : <graph number>
Function: Specifies “Cross Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTDot
Syntax: PTDot : <graph number>
Function: Specifies “Dot Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTNormal
Syntax: PTNormal : <graph number>
Function: Specifies “Normal” (—) as the graph line type.
Description: Graph number range: 1 to 100
PTSquare
Syntax: PTSquare : <graph number>
Function: Specifies “Square Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
12-6-19
Program Command Reference