Nikon ML-3 Modulite Remote Control Set User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Insert the bracket between
I the tripod head and the
camera. Then, screw the
tripod’s lock nut firmly to
secure the assembly.
2
.
Insert the receiver into the
bracket and tighten the lock
screw.
•
Make sure the receiver
and/or bracket is not visible
in the viewfinder.
3
Insert the camera plug with
. the A symbol on the plug
pointing upwards into the
remote terminal of the
camera. Then screw the
threaded ring into the
terminal.
•
Make sure the remote cord
does not obstruct the
camera lens or the
receiver's reception sensor.
12
Advertising