Nikon ML-3 Modulite Remote Control Set User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Point the transmitter in the direction of the
. • reoeption sensor and lightly press the
transmission button. The monitor light will light
up for a moment.
The reception indicator LED lights up for a
moment and the camera’s exposure meter turns
on. If the camera’s focus mode is set to C,
focus detection starts immediately.
Fully depress the transmission button. It takes
approx. 3 seconds to take a picture.
The reception indicator LED starts blinking
rapidly and continues blinking until a picture is
taken.
• To cancel operation during a delayed-
shooting interval, set the receiver’s
power/channel selector switch to OFF.
Pre-shooting focus detection:
A focus
detection signal is not sent during the delayed-
shooting interval. Be sure to lightly press the
transmission button to secure focus before
actual shooting.
24