Connecting the receiver to a camera – Nikon ML-3 Modulite Remote Control Set User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Receiver
Connecting the receiver to a camera
1
Using gentle finger pressure,
■ loosen the mounting foot
lock screw as far as it goes
without applying force.
2
While firmly holding the
. receiver, position the shoe
foot to the camera’s
accessory shoe and slide it
in as far as it goes.
Using finger pressure only,
. gently but firmly tighten the
lock screw
10
Advertising