Hood – Canon AV 1 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Hood
When shooting into bright light, light rays
entering the lens may form defects on the
image called ghost and flare. Attaching a hood
onto the lens helps to prevent this. Bayonet-
mount hoods are available as optional acces
sories for most Canon lenses. Please use only
that hood which is specified for the lens
concerned. This type of hood fits into the
bayonet mount at the front of the lens where
it is fixed by turning until it is tight. Some
hoods for wide-angle lenses require proper
positioning before mounting. Align the red
dot on this type of hood with the notch in
12
Advertising