Mounting – Canon AV 1 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Operation with an FD lens which has a
chrome Breech-loock mount ring or
with an FL lens:
Mounting
1.
Remove the lens' rear dust cap and the
camera's body cap.
2.
Make sure the mount ring is locked so
that it cannot be turned.
3.
Align the red dot of the Breech-lock ring
with the red dot on the camera body
above the camera mount,
4.
In this position, fit the rear of the lens
into the camera body and turn the
Breech-lock ring clockwise until it is tight.
1 4
Advertising