Exposure meter needle and exposure – Canon SCOOPIC 16M User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Exposure Meter Needle
and Exposure
The automatic exposure system of the Scoopic 16M is
activated when the shutter release button is depressed
approximately half way. The lens will then "stop-down"
to the correct shooting aperture and this aperture will
be indicated by the needle in the T/stop scale.
AUTO Shooting
When the aperture setting needle is within the proper
exposure range, press the shutter button all the way.
The film will be fed and will be ready for shooting.
The needle within the right-hand red mark means
over-exposure. Attach an ND filter to reduce the light
intensity.
21
Advertising