H] removing the film – Canon Z90W User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H] Removing the Film
The film rewinds automatically when it reaches the end.
The frame counter counts down as the film rewinds.
When the film is fully rewound, the frame counter shows
“
0
” and the ® blinks.
Check that the frame
counter shows “0”.
• [f the ^ is not blinking,
press the ttS button.
Open the back cover.
• Push the lever down and
remove the film.
Rewinding the fiim in mid-roii
• Use the button push projection
on the strap buckle (-> 12) to
press the ►►© button on the
bottom of the camera.
• Hold the button down until the
film starts to rewind.
o
If you shoot more than the stipulated number of
exposures on a roll of film, the final shot may be lost
during developing and processing, or the date and time
may not be imprinted on the final shot.
0-24